How To Connect Two Different AirPods To One Case In 2024

If you know how to connect two different AirPods to one case, you’re on your way to sharing your favorite tunes with a friend or family member.

With the right steps, you can easily pair two different AirPods to the same charging case and enjoy the same audio experience.

Whether you’ve lost one of your original AirPods or just want to share the love, this guide will show you how to connect two different AirPods to one case.

To start, you’ll need to make sure that both AirPods are compatible with the charging case and each other.

Once you’ve confirmed that, you can put both AirPods in the same charging case and follow the pairing instructions.

It’s important to note that the process may vary slightly depending on the model of AirPods and the devices you’re using.

However, with a little patience and some troubleshooting, you can successfully connect two different AirPods to one case and enjoy your music together.

How To Connect Two Different AirPods To One Case

If you have two different AirPods and want to connect them to one case, it’s possible. Here’s how:

Step 1: Put AirPods In The Charging Case

First, make sure both AirPods are charged.

Then, put them in the charging case.

Ensure that the charging case is charged too.

Step 2: Press And Hold The Setup Button

On the back of the charging case, there is a setup button.

Press and hold it for about 3-5 seconds until the LED light on the front of the case flashes white.

Step 3: Pair The AirPods With Your Phone

Next, take the two AirPods out of the charging case and place them next to each other.

wireless airpods

Wait for a notification on your iPhone, iPad, or iPod touch that they have been paired.

Follow the instructions to complete the pairing process.

If you have trouble pairing the AirPods, make sure they are both compatible with the charging case and your device.

Also, ensure that both AirPods are of the same generation.

If necessary, reset the AirPods and the charging case by following the manufacturer’s instructions.

That’s it! You should now be able to use both AirPods with one charging case.

Troubleshooting Mismatched AirPods

If you’re trying to connect two different AirPods to one case, you may encounter some issues.

Here are some troubleshooting steps you can take to resolve any mismatches:

Check Compatibility

Before attempting to connect two different AirPods to one case, make sure that they are compatible.

Check the model number of the AirPods and the charging case to ensure that they are the same.

If they are not compatible, you won’t be able to connect them.

Clean The AirPods

Sometimes, the reason why AirPods won’t connect is due to dirt or debris on the charging contacts.

To clean the AirPods, use a soft, dry cloth to wipe down the charging contacts on both the AirPods and the charging case.

This will help ensure that the connection is clean and clear.

Forget The Device

If you’re still having trouble connecting your AirPods, you may need to forget the device.

To do this, go to your iPhone or iPad’s settings and select Bluetooth.

Find the AirPods in the list of devices and tap the “i” icon next to them.

Then, select “Forget This Device.”

This will remove the AirPods from your device’s memory and allow you to reconnect them.

Reset Your AirPods

If none of the above steps work, you may need to reset your AirPods.

To do this, place both AirPods in the charging case and close the lid.

person holding wireless earbuds

Hold the button on the back of the case until the LED light starts flashing.

Recommended:   How To Share Audio On AirPods In 2024

This will reset the AirPods and allow you to set them up again.

Remember, if you’ve lost one of your original AirPods and had to order a replacement, as long as the new AirPod is compatible with your original set and the old charging case, you can connect two different AirPods to the same case.

If you’re still having trouble connecting your AirPods, contact Apple Support to replace your AirPod.

Using Apple’s Audio Sharing Feature

If you want to connect two different AirPods to one case, you can use Apple’s Audio Sharing feature.

This feature enables you to connect two pairs of wireless headphones to a single iPhone, iPad, or iPod Touch and seamlessly share the audio to both devices without any lag or stutter.

Sync Your AirPods

To sync your AirPods, follow the steps below:

  1. Make sure that both AirPods are in their case and the case is open.
  2. Hold the button on the back of the case until the status light starts flashing white.
  3. Bring the AirPods close to the device you want to connect them to.
  4. Follow the on-screen instructions to connect the AirPods to the device.

Stop Audio Sharing

To stop audio sharing, follow the steps below:

  1. Open Control Center on your device.
  2. Tap the AirPlay icon.
  3. Tap the AirPlay device that you want to stop sharing audio with.
  4. Tap “Stop AirPlay.”

Volume Control

When you are sharing audio between two different AirPods, you can control the volume of each pair independently.

To do this, follow the steps below:

drew patrick miller o6AAx9dl Y unsplash
  1. Open Control Center on your device.
  2. Tap the AirPlay icon.
  3. Tap the volume slider.
  4. Drag the slider for each pair of AirPods to adjust the volume.

Note that some AirPods may have different features and settings.

For instance, AirPods Pro have an animation that shows the current noise-cancellation mode.

Be sure to check the user manual for your AirPods to learn more about their specific features and settings.

In conclusion, using Apple’s Audio Sharing feature is a great way to connect two different AirPods to one case and share audio between them.

With a few simple steps, you can sync your AirPods, control the volume, and stop audio sharing when you’re done.

Key Takeaways

Connecting two different AirPods to one case is a simple process that you can do in just a few steps.

Here are the key takeaways to keep in mind when connecting your AirPods:

  • If you have lost one of your original AirPods and had to order a replacement, don’t worry. As long as the new AirPod is compatible with your original set and the old charging case, you can connect the two different AirPods to the same case.
  • To connect your AirPods, press and hold the button on the back of the case for three seconds. The LED on the front of the case will flash white, indicating that the case is in discovery mode.
  • Put your AirPods near each other and wait for a notification on your iPhone or iPad that they’ve been paired. You can also check the status light on the front of the case to see if they are connected.
  • If you are connecting a replacement AirPod, press and hold the setup button on the back of the case until the indicator light flashes white. Open your AirPods case and place it close to your iPhone. The AirPods need to remain fully seated in the case. Wait for the setup animation to occur and tap Connect.
  • Once your AirPods are connected, you can adjust the volume and control other settings by pressing the function button on the lock screen of your iPhone.
  • If you are having trouble connecting your AirPods, make sure that they are both fully charged and that they are compatible with your charging case. You can also try resetting your AirPods by holding down the button on the back of the case for 15 seconds until the status light flashes amber.

Related Articles