Why Do My AirPods Say Connected But Not Working

Why do my AirPods say connected but not working?

It’s a common issue that many AirPods users face, and it can be caused by a variety of factors.

When this happens, it can be difficult to determine the root cause and find a solution.

One possible reason for your AirPods showing as connected but not working is a Bluetooth connectivity issue.

Bluetooth is what allows your AirPods to connect wirelessly to your device, and if it’s not functioning properly, your AirPods may not work as expected.

Another potential issue could be a problem with the AirPods themselves, such as a software glitch or hardware malfunction.

Fortunately, there are several troubleshooting steps you can take to try and resolve this issue. From checking your Bluetooth settings to resetting your AirPods, there are a variety of potential solutions that may help you get your AirPods working again.

In this article, we’ll explore some of the most common reasons why your AirPods may show as connected but not working, and provide step-by-step instructions for troubleshooting the issue.

Why Do My AirPods Say Connected But Not Working

If you’re experiencing issues with your AirPods where they seem to be connected but not working, there are a few things you can try to troubleshoot the problem.

Check AirPods And Charging Case Battery Levels

One possible reason for your AirPods not working could be due to low battery levels.

Check the battery levels of your AirPods and charging case by opening the lid of the charging case next to your iPhone or by asking Siri. If the battery levels are low, charge them up and try using them again.

Check For Debris Or Obstructions

Another possible reason for your AirPods not working could be due to debris or obstructions in the AirPods or charging case.

Check the speaker and microphone meshes on your AirPods for any debris or obstructions, and clean them if necessary.

Also, check the Lightning port on the bottom of the charging case for any debris or obstructions.

Restart Your AirPods And Device

If your AirPods are still not working, try restarting them and your device.

pexels ready made 3921803 1

Put your AirPods back into the charging case and close the lid.

Wait for a few seconds and then open the lid.

Press and hold the setup button on the back of the charging case until the status light flashes amber, then white.

Restart your device and try using your AirPods again.

Forget And Re-Pair Your AirPods

If restarting your AirPods and device doesn’t work, try forgetting and re-pairing your AirPods.

Go to Settings > Bluetooth on your device and tap the “i” icon next to your AirPods.

Tap “Forget This Device” and then confirm.

Put your AirPods back into the charging case and close the lid.

Wait for a few seconds and then open the lid.

Press and hold the setup button on the back of the charging case until the status light flashes amber, then white.

Follow the instructions on your device to re-pair your AirPods.

Update Your Device And AirPods Firmware

Finally, make sure that your device and AirPods firmware are up to date.

Go to Settings > General > Software Update on your device to check for any available updates.

Also, make sure that your AirPods are connected to your device and then go to Settings > General > About > AirPods to check for any available firmware updates.

By following these troubleshooting steps, you should be able to resolve any issues with your AirPods saying connected but not working.

Troubleshooting AirPods Audio Issues

If your AirPods are connected but not working, there are a few things you can try to troubleshoot the issue.

Here are some steps you can take to fix audio issues with your AirPods.

Check AirPods Audio Output Settings

First, check your audio output settings to make sure your AirPods are selected as the audio device.

To do this, go to your device’s settings and select Bluetooth.

If your AirPods are connected, make sure they are selected as the audio output device.

Check AirPods Audio Balance Settings

If you’re experiencing audio issues with one AirPod, check your audio balance settings.

Go to your device’s accessibility settings and select Audio/Visual.

From there, you can adjust the audio balance between your left and right AirPods.

Clean Your AirPods And Charging Case

Dirt and debris can accumulate on your AirPods and charging case, which can cause audio issues.

pexels ready made 3921870

Use a soft, dry cloth to clean your AirPods and charging case.

Avoid using water or cleaning solutions, as they can damage your AirPods.

Check For Automatic Ear Detection Settings

If your AirPods are not working when you put them in your ears, check your automatic ear detection settings.

Go to your device’s settings and select Bluetooth.

From there, select your AirPods and make sure automatic ear detection is turned on.

Reset Your AirPods To Factory Settings

If none of these steps work, try resetting your AirPods to factory settings.

To do this, put your AirPods in their charging case and press and hold the button on the back of the case until the LED light flashes white.

Then, reconnect your AirPods to your device.

By following these troubleshooting steps, you can fix audio issues with your AirPods and enjoy your music and podcasts without any interruptions.

Troubleshooting AirPods Hardware Issues

If your AirPods are connected but not working, there may be some hardware issues that you need to troubleshoot.

Here are some steps you can take to help diagnose and fix the problem.

Check AirPods Microphone And Speaker Functionality

The first thing you should do is check the microphone and speaker functionality of your AirPods.

Make sure that the microphone and speaker mesh on each AirPod are clean and free of debris.

If they are dirty, use a soft-bristled brush to gently clean them.

Next, try playing some music or making a phone call to see if the speaker is working properly.

If you can’t hear anything, try adjusting the volume or checking your device’s sound settings.

If you still can’t hear anything, there may be a problem with your AirPods’ speaker.

To test the microphone, try making a phone call or recording a voice memo.

If the other person can’t hear you or the recording is muffled, there may be an issue with your AirPods’ microphone.

Recommended:   How To Use AirPods Pro In 2024

Check AirPods Battery Status And Charging

If your AirPods are not working, it may be because they are out of battery or not charged properly.

Check the battery status of your AirPods by placing them in the charging case and opening the lid near your iPhone or iPad.

The battery status of your AirPods should appear on the screen.

If your AirPods are not charging, make sure that the charging case is properly connected to a power source and that the AirPods are properly seated in the case.

You can also try resetting your AirPods by holding down the button on the back of the charging case until the status light flashes amber.

Check AirPods For Faulty Hardware Or Glitches

If your AirPods are still not working, there may be a hardware issue or glitch that needs to be addressed.

Try resetting your AirPods by holding down the button on the back of the charging case until the status light flashes white.

You can also try resetting your device’s network settings by going to Settings > General > Reset > Reset Network Settings.

If none of these steps work, there may be a hardware issue with your AirPods that requires repair or replacement.

Check AirPods For Replacement Or Repair Options

If your AirPods are still not working after trying all of the above steps, you may need to consider replacement or repair options.

If your AirPods are still under warranty, you may be able to get them repaired or replaced for free.

prateek katyal 5d2E5UjHLas unsplash

Contact Apple Support for more information.

If your AirPods are out of warranty, you may need to purchase a replacement set.

You can also try taking your AirPods to a third-party repair shop, but make sure that they are authorized by Apple and use genuine Apple parts.

Troubleshooting AirPods Connectivity Issues With Apple Devices

If your AirPods say connected but are not working, it can be frustrating.

Here are some troubleshooting steps you can try to get your AirPods working again.

Check AirPods And Device Bluetooth Settings

First, make sure that Bluetooth is turned on for both your AirPods and your device.

You can check this by going to the Bluetooth settings on your device and making sure that Bluetooth is turned on.

If your AirPods are connected, make sure that they are selected as your audio device.

Check AirPods Compatibility With Device Operating System

Make sure that your AirPods are compatible with the operating system of your device.

AirPods Pro require an iPhone, iPad, or iPod touch with iOS 13.2 or later, a Mac with macOS 10.15.1 or later, an Apple Watch with watchOS 6.1 or later, or an Apple TV with tvOS 13.2 or later.

If your device does not meet these requirements, your AirPods may not work properly.

Check AirPods Connectivity With Other Bluetooth Devices

If your AirPods are not working with one device, try connecting them to another device to see if the issue is with the AirPods or the device.

If your AirPods work with another device, the issue may be with the original device’s Bluetooth connection.

Check AirPods Accessibility And Control Panel Settings

Make sure that your AirPods are set up correctly in the Accessibility and Control Panel settings of your device.

You can check this by going to the properties of your AirPods in the Bluetooth settings of your device.

Make sure that the settings are configured correctly for your AirPods.

Check AirPods Network Settings

Check the network settings of your device to make sure that your AirPods are not blocked by a firewall or other security settings.

If your AirPods are blocked, you may need to adjust the network settings of your device to allow them to connect.

By following these troubleshooting steps, you can hopefully get your AirPods working again.

If none of these steps work, you may need to contact Apple support for further assistance.

Troubleshooting AirPods Connectivity Issues with Windows PC

If your AirPods are connected to your Windows PC but not working, there are a few things you can try to troubleshoot the issue.

Here are some sub-sections that can help you resolve the connectivity issue:

amr taha h7HFiioDL1Y unsplash

Check AirPods And PC Bluetooth Settings

First, make sure that the Bluetooth on both your AirPods and PC is turned on and discoverable.

Check if your AirPods are in range of your PC.

If you’re not sure how to do this, refer to the user manual for your AirPods or PC.

Also, make sure that your AirPods are charged and turned on.

Check AirPods Compatibility With Windows Operating System

Your AirPods may not be compatible with your Windows operating system.

Check if your AirPods are compatible with your version of Windows.

If not, you may need to upgrade your operating system or use a different pair of headphones.

Check AirPods Connectivity With Other Bluetooth Devices

If your AirPods are not connecting to your PC, try connecting them to another Bluetooth device to see if they work.

If they do, the issue may be with your PC’s Bluetooth settings.

Check AirPods Audio And Recording Tab Settings

Make sure that your AirPods are selected as the default audio and recording device on your PC.

To do this, go to the Sound settings in the Control Panel and select your AirPods as the default device.

Check AirPods Driver And Firmware Updates

Make sure that your AirPods have the latest driver and firmware updates installed.

Check the manufacturer’s website for updates and instructions on how to install them.

By following these troubleshooting steps, you should be able to resolve any connectivity issues between your AirPods and Windows PC.

Key Takeaways

If your AirPods are showing as connected but not working, there are a few key takeaways to keep in mind:

  • First, try turning your AirPods off and then back on again. This can help reset the connection and resolve any issues.
  • If that doesn’t work, try resetting your AirPods by putting them in their case and holding down the button on the back until the LED light flashes.
  • If your AirPods are still not working, make sure that they are fully charged. You can check the battery level by opening the case next to your iPhone or by asking Siri.
  • If your AirPods are connected but the sound is coming from your phone instead of the AirPods, try turning off your phone’s Bluetooth and then turning it back on again.
  • Finally, if none of these steps work, you may need to contact Apple support for further assistance.

Remember, AirPods can be a bit finicky at times, but with a little troubleshooting, you should be able to get them working again in no time.

Related Articles